1.2
Electrical safety guidelines
Disconnect the power plug from the power socket:
●
before emptying the waste bin,
●
if it will remain unused for a longer period,
●
before cleaning the device,
●
before moving the device.
●
Do not put the device into operation in the case of damage to the power cable, the
●
power plug or the device itself (risk of injury)!
Do not complete any modifications to the power cable because it is designed for the
●
power supply specified.
Never exceed the recommended load capacity of the power socket or any connected
●
extension cables!
It is forbidden to open the cutting mechanism attachment for repair pur-
Attention:
poses. Risk of fatal injury! In addition, all claims under the terms of guaran-
tee will be deemed null and void.
2
Intended Use
Only use the PS 408.2 CCD shredder to shred paper, CDs and credit cards by
●
inserting them in the respective infeed! The material to be shredded must be dry and
comply with the requirements stipulated in Chapter "Technical Data"! Attempting to
shred other material can lead to personal injury (e.g. through splinters from hard
material, etc.) and damage to the equipment (e.g. damage to the cutting mechanism
etc.).
Remove all paper clips and staples from paper before feeding it in the device!
●
Do not shred continuous forms in this device!
●
The unit may only be used in dry, indoor rooms.
●
19