Victron energy BMV-700 Manual Del Usuario página 15

3 FEATURES AND FUNCTIONALITY
3.1 Features of the four BMV models
The BMV is available in 4 models, each of which addresses a different
set of requirements.
Comprehensive monitoring
1
of a single battery
Basic monitoring of an
2
auxiliary battery
Battery temperature
3
monitoring
Monitoring of the mid-point
4
voltage of a battery bank
5 Use of alternate shunts
Automatic detection of
6
nominal system voltage
Suitable for high voltage
7
systems
8 Several interface options
Remark 1:
Features 2, 3 and 4 are mutually exclusive.
Remark 2:
The cable with integrated temperature sensor has to be purchased
separately (part no: ASS000100000).This temperature sensor is not
interchangeable with other Victron temperature sensors, as used with
Multis or battery chargers.
3.2 Why should I monitor my battery?
Batteries are used in a wide variety of applications, mostly to store energy
for later use. But how much energy is stored in the battery? No one can
tell by just looking at it.
BMV- BMV-
700 700H
• •
• •
• •
•
• •
BMV-702
and 712
•
•
•
•
•
•
•
13