Intended Use; Safety Precautions - Snom M325 Bundle Manual Del Usuario

M325
Important Information
The M325 bundle contains one M300 base station with power adapter and Ethernet cable and one M25 handset, two
rechargeable batterie, and one handset charger with nondetachable power adapter.
Setting up, configuring, and using base station and handset
For information on setting up, configuring, and using the base station and the handset, please refer to the user's manuals
listed on the M-series product pages at www.snom.com.

Intended Use

The handset is designed for use with a Snom M-series base. The base is designed for use with a Snom M-series handset.
Any other use is considered unintended use. Any modification or reconstruction not described in the user manual is
considered unintended use.

Safety precautions

Please read these precautions and the instructions on how to set up and use the phone thoroughly before using the phone.
Save this guide and do not give the phone to third parties without it.
Charger, power supply/adapter, rechargeable batteries
Use only the power converter (AC/DC adapter) delivered with the base or a power supply expressly recommended by
snom. Other power power supplies may damage or even destroy the device.
Use only the rechargable batteries delivered with the handset or expressly recommended by snom. Do not attempt to
replace the nondetachable power supply of the charger. In case of malfunction, contact your dealer or snom-authorized
service personnel.
• Power of M25 handset charger:
◦ EU: Ten Pao SMPS adapter, model no. S004LV050050, input 100-240 VAC, output 5V DC 500 mA (affixed to
charger)
◦ US: Ten Pao SMPS adapter, model no. S003GU050050, input 100-240 VAC , output 5V DC 500 mA (affixed to
charger)
◦ AUS: Ten Pao SMPS adapter, model no. S004LS050050, input 100-240 VAC , output 5V DC 500 mA (affixed to
charger
• Power of M300 base station:
◦ EU: Ten Pao SMPS adapter, model no. S003GV0500060, input 100-240 VAC, output 5V DC 600 mA, coaxial
power connector
◦ US: Ten Pao SMPS adapter, model no. S003GU050060, input 100-240 VAC, output 5V DC 600 mA, coaxial power
connector
◦ AUS: Ten Pao SMPS adapter, model no. S003GS050060, input 100-240 VAC, output 5V DC 600 mA, coaxial
power connector
Placement of base, handset charger, cables, and cords
• Avoid placing the devices' cords where people may trip over them. Avoid placing the cords where they may be exposed
to mechanical pressure as this may damage it. If the power supply cord or the plug is damaged, disconnect the device
and contact qualified service personnel.
• Charger, power adapter, and cord are for indoor installation only. Not for outdoor installation!
• The operational temperature for base station and handset is between -10°C and + 50°C (14°F and 122°F); the charging
temperature for the handset is between +5°C and +45°C (41°F and 113°F).
• Do not install product in rooms with high humidity (for example, in bathrooms, laundry rooms, damp basements). Do not
immerse product in water and do not spill or pour liquids of any kind onto or into any parts of it.
• Do not install product in surroundings at risk for explosions and do not use the handset in such surroundings (paint
shops, for example). Do not use the phone if you smell gas or other potentially explosive fumes!
• Install the base at a minimum distance of 100 cm (39") to persons and animals.
• Medical devices might be adversely affected. Please consider the technical ramifications when installing the devices in
a doctor's office, for example.
4
Quick Start Guide
v1.08