Clatronic CDP 548 Instrucciones De Servicio página 29

5....-05-CDP 548
2. Insert a CD with the label facing upwards and press carefully over the button
until it snaps into place. Close the CD compartment.
3. Press the PLAY/PAUSE button to start the playback. "- -" appears in the display
followed by the number of tracks.. The CD starts from the first track. The track
currently being played and the time that has elapsed are shown in the display.
4. To remove a CD, press the STOP key, open the CD deck with the OPEN key
and take out the CD carefully.
Always keep the CD deck cover closed.
Description of the CD buttons:
PLAY/PAUSE II:
PREV I :
NEXT I:
STOP :
MODE:
RAND:
Programmed Play
1. Press the STOP key
2. Press the PROG key.
11.02.2003 15:38 Uhr
You can briefly interrupt the playing. Renewed pressing of
the button will re-start the playing from the same place.
Press once =
Press a second time = This jumps back to the previous
Press a third time =
With this button you can jump to the following track or the
next track but one etc. If the button is kept pressed down,
the machine starts to search through the tracks.
The CD is stopped. By pressing once again, the unit is swit-
ched off.
The following functions can be selected with the MODE key:
Press once =
Press a second time = „REPEAT ALL": the whole CD is
Press a third time =
Press a fourth time = all the functions are reset.
Press once =
Press a second time = all the functions are reset.
Seite 29
This starts the current track again
from the beginning.
track.
This plays the song before etc. If the
button is kept pressed down, the
machine starts to search through
the tracks.
„REPEAT 1": the current track is
repeated continuously;
played continuously;
„INTRO": All tracks are played for
ten seconds.
The normal play mode is resumed.
The word "SHUFF" flashes in the
display. All the tracks are played
one after other at random.
The normal play mode is resumed.
GB
29