Clatronic BQ 2672 Instrucciones De Servicio página 24

5....-05-BQ 2672
GB
Overview of the Components
A Heating element
B On/Off switch with indicator lamp
C Handle
D Power cable with plug
• Release the fixing screw (H).
• Remove any packaging material that may be present.
• Clean the gridiron (F) and the reflective metal sheet (G) with a damp cloth.
• Fill in 1.5 m of cold water up to the "MAX" mark in the trough.
• Assemble all parts as illustrated in the drawing.
• Fix the heating element (A) back into place with the screw (H).
• Before using for the first time, fill the grill tray with water and use it for 15 minu-
tes to remove the protective film from the heating coil. The development of
smoke is normal. Make sure that a sufficient level of ventilation is available.
• Preheat the device before use for approximately 5 minutes.
1. Insert the plug in a duly installed 230V/50Hz protective contact socket.
2. Switch on the appliance (the LED in the switch lights up).
3. Lay the food directly on the grill grid. Never use plates, trays or aluminum foil
beneath the food. The grilling time depends on the thickness of the food and the
set temperature. Thick foods are grilled more quickly by piercing it with metal
skewers. Turn the food from time to time.
4. Should the water level drop below the MIN mark after continuous use, pull the
plug from the socket and refill with water until the MAX mark is reached.
Switching-off: Switch off the appliance (the LED in the switch is off).
• Always pull the plug from the mains socket before cleaning and wait until the
unit has cooled down.
• Release the fixing screw (H).
• Clean the unit with a slightly dampened cloth. Never dip the heating element
into water!
• The gridiron, reflective metal sheet and trough can be cleaned in soapy water.
• Never use a steel brush or other scratching objects.
• Assemble all the parts as shown in the diagram.
• Fix the heating element (A) back into place with the screw (H).
24
25.02.2003 11:39 Uhr
Preliminary Operations
E Grill tray
F Grill grid
G Reflective metal sheet
H Fixing screw
Usage
Cleaning
Seite 24