Protecting The Environment - Black+Decker BDCMTI Manual De Instrucciones

16 • ENGLISH
Operation
f To switch the tool on, press the variable speed switch
on the power unit. The tool speed depends on how far
you press the switch.
f To switch the tool off, release the variable speed
switch.
Quick release chuck (Fig. B)
Warning! Make certain to turn off and remove battery
from tool or disconnect plug from power source before
installing or removing accessories.
Note: Only use 2 inch (50mm) length, 1/4 inch (6.35 mm)
hex accessories with a retaining groove to ensure the
impact driver functions properly.
To install an accessory, pull the chuck collar (2) away
from the front of the tool, insert the accessory, and release
the collar. The accessory is locked in place.
To remove an accessory, pull the chuck collar (2) away
from the front of the tool, remove the accessory and
release the collar.
MAINTENANCE
Use only a dry cloth to clean the tool. Never let any liquid
get inside the tool; never immerse any part of the tool into
a liquid.
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning. Your charger does not
require any maintenance apart from regular cleaning.
Warning! Before performing any maintenance on the
tool, remove the battery from the tool. Unplug the charger
before cleaning it.
f Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
f Regularly clean the motor housing using a damp
cloth. Do not use any abrasive or solvent-based cleaner.
f Regularly open the chuck and tap it to remove any
dust from the interior.
¡Important! To ensure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(other than those listed in this manual) should be performed
by authorized service centers or other qualified organizations,
always using identical replacement parts. Unit contains no
user service able parts inside.
ACCESSORIES
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
Warning! The use of any accessory not recommended
for use with this tool could be hazardous.

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SPECIFICATIONS
IMPACT DRIVER
ATTACHMENT
.../min
Speed
(rpm)
Max. Torque Nm (lb*in)
Impact ipm
Chuck in (mm)
BDCMTI
0 - 3100
146,88 (1300)
0 - 3500
1/4 (16,4) Quick connect
hex