Keyguard; Connectivity - Nokia 2608 Manual Del Usuario

■ Keyguard

With the keyguard, you can lock the keypad to prevent accidental
keypresses. When the keypad is locked, it unlocks if you receive a
call. When the call ends, it is automatically locked again.
To set the keypad to lock automatically when the device is in
the standby mode and no function of the device has been used
for a certain time, select
keyguard > On.
To lock the keypad manually, select Menu, and press * within
4 seconds.
When the keyguard is on, calls may be possible to the official
emergency number programmed into your device.
To unlock the keypad, select Unlock, and then press * within
4 seconds.

■ Connectivity

To use the USB data cable to transfer data and files between your
device and a compatible PC, install Nokia PC Suite software on
the PC first. Connect your device to the PC with the USB data
cable, and start the synchronization from the PC.
You may find PC Suite and related information on the Nokia web
site at www.nokia.com/pcsuite.
Important: Do not make calls when the USB data cable is
connected to the device.
22
Menu > Settings > Phone > Automatic