Samson 536330 Guía De Servicio Técnico Y Recambio

EN
Compressed air powered reciprocating piston pump. This high
capacity demand pump is compatible with mineral and synthetic oils
and suitable for large installations with long length piping supplying
several fluid outlets simultaneously.
This pump can be mounted on the wall, with wall mounting bracket
(Part. No. 539004).
ES
Bomba de pistón alternativo accionada por aire comprimido.
Permite bombear grandes caudales de todo tipo de aceites minerales.
Aplicable en instalaciones con conducciones de gran longitud para dar
servicio simultáneamente a varias salidas de fluido. La bomba puede
ser montada en la pared (con soporte mural 539004).
EN
R ,
ead all instRuction manuals
. t
equipment his equipment is foR pRofessional use only
The use of non compatible fluids may cause damage in the pump
and serious personal injury. This equipment is not intended for use
with fluids that fall within the Group 1 fluid as defined that are
explosive, extremely flammable, highly flammable, flammable, very
toxic, toxic, oxidizing or where the vapor pressure if greater than 7 psi
(0.5 bar) above the pressure atmospheric at the maximum allowable
temperature.
The pump generates high or very high pressures. Do not exceed the
maximum air inlet pressure of 170 psi (12 bar).
A direct hit against the human body may result in an injury.
Samson Corporation • One Samson Way • N.C. 28778 Swannanoa USA • Phone (828) 686-8511 • Fax (828) 686-8533
3:1 RATIO AIR OPERATED OIL PUMP PM45
BOMBA BEUMÁTICA DE ACEITE PM45, RATIO 3:1
Parts and technical service guide
Guía de servicio técnico y recambio
Description / Descripción
WARNINGS / ADVERTENCIAS
WARNING!
,
tags and labels befoRe opeRating the
.
Part No. / Cód.:
536330
This unit may have stored pressure, release all pressure and
disconnect from any fluid systems before servicing. To ensure safe
operation of this unit, all service work should be by qualified
personnel only.
When not in use, be sure to shut off the air supply to avoid accidents.
Do not alter or modify this equipment. Use genuine components
provided from SAMSON. Any unauthorized tampering with this
equipment, improper use, poor maintenance or removal of
identifications labels may invalidate the guarantee.
All fittings in the system connected to the outlet of the pump should
be suitable for the maximum possible pressure generated by the
pump/air motor. If the systems cannot be designed to take the
maximum pressure produced by the pump, safety valves or diverter
valves should be fitted.
536331
Fig. 1
1
R. 06/17 853 817