Symbols
WARNING! Clearing saws, brushcutters
and trimmers can be dangerous! Careless
or incorrect use can result in serious or
fatal injury to the operator or others. It is
extremely important that you read and
understand the contents of the operator's manual.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
•
Wear a protective helmet where
there is a risk of falling objects
•
Approved hearing protection
•
Approved eye protection
Max. speed of output shaft, rpm
Watch out for thrown objects and
ricochets.
The operator of the machine must
ensure, while working, that no
persons or animals come closer than
15 meters (50 ft.).
Machines fitted with saw blades or
grass blades can be thrown violently
to the side when the blade comes
into contact with a fixed object. This is
called blade thrust. The blade is
capable of amputating an arm or leg.
Always keep people and animals at least 15 meters (50
ft.) from the machine.
Arrows which show limits for handle
positioning.
Always wear approved protective
gloves.
Wear sturdy, non-slip boots.
2 – English
KEY TO SYMBOLS
Primer bulb
Choke control
Only use non-metallic, flexible cutting
attachments, i.e. trimmer heads with
trimmer cord.
10000
Other symbols/decals on the machine refer to
special certification requirements for certain
markets.
Switch off the engine by moving the
stop switch to the STOP position
before carrying out any checks or
maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Approved eye protection must always
be used.
1155650-49 Rev. 3 2016-11-08