Technical data
Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litre
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear, measured according to ANSI B175.3-2013,
dB(A), min/max:
Vibration levels
Vibration levels at handles, measured according to ANSI B175.3-2013, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under
various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! This spark ignition system complies with the Canadian ICES-002 standard.
NOTE! The sound pressure level at operator's ear and vibrations on the handles are measured with all the approved
cutting attachments for the machine. The table indicates the lowest and highest values.
224L
Approved accessories
Arbor shaft thread M10
Trimmer head
22 – English
TECHNICAL DATA
3
Type
S35
T25
T35
Alloy (Ø 2.0 - 3.3 mm cord)
224L
1,53/25,0
1,38/35
1,03/26
3100
12000
8220
0,8 / 7000
No
No
Ikeda
NGK CMR5H
0,024/0,6
Walbro
1,16/0,55
11.0/5,0
90/97
2
1,9/1,8
2,2/1,9
4,8/11,3
8,9/14,0
Cutting attachment guard, Art. no.
503 97 71-01 / 588 11 79-01
503 97 71-01 / 588 11 79-01
503 97 71-01 / 588 11 79-01
503 97 71-01 / 588 11 79-01
1155650-49 Rev. 3 2016-11-08