Taurus HC-0150 Manual Del Usario página 19

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
- If the connection to the mains has been
damaged, it must be replaced, take the
appliance to an authorised technical support
service. Do not attempt to disassemble or
repair the appliance by yourself in order to
avoid a hazard.
- This appliance is for household use only, not
professional or industrial use.
- For the pruposes of recharging the battery,
only use the detachable supply unit provided
with this appliance.
- Instructions are also available on website
www-taurus-home.com
- Ensure that the voltage indicated on the charger rating label mat-
ches the mains voltage before plugging in the charger.
- Connect the appliance to a socket that can supply a minimum of
10 amperes.
- The charger's plug must fit correctly into the mains socket. Do not
alter the plug. Do not use plug adaptors.
- Do not force the power cord. Never use the power cord to lift up,
carry or unplug the battery charger.
- Do not wrap the power cord around the appliance.
- Do not clip or crease the power cord.
- Check the state of power cord. Damaged or tangled cables
increase the risk of electric shock.
- Supply cord should be regularly examined for signs of damage,
and if the cord is damaged, the appliance must not be used.
- Do not touch the plug with wet hands.
- Do not use the appliance if the cable or plug is damaged.
- If any of the appliance casings breaks, immediately disconnect

Publicidad

Tabla de contenido
loading

Tabla de contenido