Dyna-Glo DGN576DNC-D Manual Del Usuario página 8

ASSEMBLY INSTRUCTIONS
7. Secure lid and firebox assembly (B) on top of
left leg assembly (R) and right leg assembly (M)
using six M6x20bolts (BB).
Hardware Used
M6x20 Bolt
BB
8. Attach damper (H) to inside of lid and firebox
assembly (B) using four M5 shoulder bolts (CC)
and four M5 lock nuts (II). Repeat for remaining
damper (H).
NOTE: For clarity, illustration is shown with front
of lid and firebox assembly (B) removed.
Hardware Used
CC
M5 Shoulder Bolt
II
M5 Lock Nut
9. Insert damper handle – right (G) into the two holes
on right side damper (H). Secure with two cotter
pins (FF). Repeat for damper handle – left (V).
Hardware Used
FF
Cotter Pin
7
BB
x 6
R
8
CC
x 8
B
x 8
9
x 4
8
B
H
H
FF
G
G
M
II
JJ