Accessories; Standard Accessories; Optional Accessories - Hitachi DH 22PB Manual De Instrucciones

English
WARNING:
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1)Plastic Case (Code No. 323130) ...............................................................................1
(2)Side Handle (Code No. 303659) ...............................................................................1
(3)Depth Gauge (Code No. 310331) ............................................................................. 1

OPTIONAL ACCESSORIES ...........

1. Drilling anchor holes (Rotation + Hammering)
Drill Bit (Slender shaft)
(1) Drill Bit (Slender
Shaft)
Outer diameter
1/8"
(3.4 mm)
9/64"
(3.5 mm)
18

ACCESSORIES

ALWAYS use Only authorized HITACHI replacement parts and
accessories. NEVER use replacement parts or accessories which
are not intended for use with this tool. Contact HITACHI if you
are not sure whether it is safe to use a particular replacement
part or accessory with your tool.
The use of any other attachment or accessory can be dangerous
and could cause injury or mechanical damage.
(2) Adaptor for slender shaft
(SDS-plus shank)
(1) Drill Bit (Slender Shaft)
Effective Length Overall Length
1-25/32"
(45 mm)
1-25/32"
(45 mm)
sold separately
Code No.
3-35/64"
306369
(90 mm)
3-35/64"
306368
(90 mm)
(2) Adaptor for
Slender Shaft
Code No.
306370