Standard Accessories - Hitachi DH 28PC Instrucciones De Manejo

Ocultar thumbs Ver también para DH 28PC:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
PRECAUTION
Keep children and infirm persons away.
When not in use, tools should be stored out of reach of
children and infirm persons.
PRECAUTIONS ON USING ROTARY HAMMER
1.
Wear ear protectors.
Exposure to noise can cause hearing loss.
SPECIFICATIONS
Voltage (by areas)*
Power input
No-load speed
Full-load impact rate
Capacity: concrete
steel
wood
Weight (without cord and side handle)
*Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Plastic case ................................................................. 1
(2) Side handle ................................................................ 1
(3) Stopper ........................................................................ 1
2.
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
3.
Do not touch the bit during or immediately after
operation. The bit becomes very hot during
operation and could cause serious burns.
4.
Before starting to break, chip or drill into a wall,
floor or ceiling, thoroughly confirm that such items
as electric cables or conduits are not buried inside.
5.
Always hold the body handle and side handle of
the power tool firmly. Otherwise the counterforce
produced may result in inaccurate and even
dangerous operation.
6.
Wear a dust mask
Do not inhale the harmful dusts generated in
drilling or chiseling operation. The dust can
endanger the health of yourself and bystanders.
(127 V, 220 V)
720 W*
0 – 1050 / min
0 – 4000 / min
4 – 28 mm
13 mm
32 mm
3.5 kg
Standard accessories are subject to change without
notice.
English
6

Publicidad

Tabla de contenido
loading

Tabla de contenido