Valve Assembly - Bradley Advocate AV90 Manual Del Usuario

Installation
7b Valve Assembly
Attach angle stops to hot and cold
B
stub outs. Attach 1/2" supply hoses
to hot and cold supply stops.
Angled Supply Stop
⁵⁄₈" O.D. x ³⁄₈" O.D.
Bradley • 215-1773 Rev. D; ECN 13-08-028
¼" Supply Tube (from
faucet) black, left hand
Supply Hose, Cold
½" x 24"
Supply Hose, Hot
½" x 24"
D
For clarity, the front dryer
hose is not shown.
Loosen the compression nut. Push the supply
A
tube firmly into the tube connector until it is
seated. Retighten the compression nut by hand.
¼" Supply Tube (from
faucet) green, center
Valve, Valve, Hot
Cold Supply Supply
Attach transformer circuit plug to
transformer connector plug on
gang valve bracket. attach gang
valve to the wall. See Step 1a for
valve bracket anchor locations.
Three-Station Valve
TMA Valve (S45-2489) is shown
TL Valve (S45-2488) is similar
¼" Supply Tube (from
faucet) red, right hand
Green
Black Red
C
Attach hot and cold
hoses to the valve.
1/21/2014
AV90
17