Preparing The Appliance For Operation; Cleaning And Care - Unold 86106 Instrucciones De Uso

DE

PREPARING THE APPLIANCE FOR OPERATION

EN
1. Comply with all safety instructions and safety regulations.
2. Ensure that you have selected a safe location.
FR
3. Plug the mains plug of the appliance into an electrical outlet (230 V ~
50 Hz).
NL
4. Select the desired function on the rotary function regulator:
Heating operation
IT
- Level "I" for less heat
ES
- Level "II" for more head
For heating operation select the desired temperature via the rotary thermo-
PL
stat regulator, by turning the regulator. The regulator is variably adjustable.
The indicator light shows the mode.
5. The appliance heats until the desired temperature is reached, then the
appliance switches off. The appliance will switch on again as soon as the
room temperature drops below the set temperature.
Fan operation
Level "
Attention: If the appliance was previously on heating operation, the outflow-
ing air will still be warm initially. Depending on the previous heating capac-
ity it can take some time until the appliance provides cool air.
When you adjust the fan function, you must place the rotary thermostat
regulator on the highest position.
6. To switch off the appliance, place the rotary regulator on position "O" and
unplug the mains plug.
Be aware that the appliance can become very hot - fire hazard! Particularly
ensure that children are kept away from the appliance.

CLEANING AND CARE

1. Never use any abrasive scouring agents, steel wool, metal objects, hot clean-
ing agents or disinfectants.
2. You can remove dust in the appliance if you carefully hold a vacuum cleaner
against the air inlet and outlet grille.
3. Store the fan heater in a dry, safe place so that it is protected from dust,
shocks, heat and moisture.
22 von 64
Copyright UNOLD AG | www.unold.de
" for the fan function (cool air)
Switch off the appliance. To switch off the appliance, place the
rotary regulator on position "O" and unplug the mains plug.
Allow the appliance to cool completely.
(approx. 1,000 watt)
(approx. 2,000 watt)
Stand 24.2.2020