Installing Your Thermostat - Honeywell RTH6500 Serie Guia Del Usuario

Setting up your thermostat
Setting up your Wi-Fi programmable thermostat is easy. It is preprogrammed and ready to
go as soon as it is installed and registered.
1 Install your thermostat.
Connect your home Wi-Fi network.
2
3 Register online for remote access.
Before you begin,
the QR Code

Installing your thermostat

You might need the following tools to install this thermostat:
• No. 2 Phillips screwdriver
• Small pocket screwdriver
• Pencil
• Level (optional)
1 Switch OFF power to your
heating/cooling system.
Important!
To protect your equipment,
switch OFF the power to your heating/
cooling system at the breaker box or
the system switch.
you may want to watch a brief installation video. Use
at the front of this guide, or go to wifithermostat.com/support
®
• Drill and bits (3/16" for drywall,
7/32" for plaster) (optional)
• Hammer (optional)
• Electrical tape (optional)
3
Circuit breaker
box
or
Heating/cooling
M31535
system power
switch
69-2715EF—07