Tarjeta Wlan; Removing The Wlan Card - Dell OptiPlex 7080 Micro Manual De Servicio

Steps
1. Align the notch on the solid-state drive with the tab on the solid-state drive connector on the system board.
2. Insert the solid-state drive at a 45-degree angle into the solid-state drive connector.
3. Replace the screw (M2x3.5) that secures the M.2 2280 PCIe solid-state drive to the system board.
Next steps
1. Install the hard-drive assembly.
2. Install the front bezel.
3. Install the side cover.
4. Follow the procedure in

Tarjeta WLAN

Removing the WLAN card

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the hard-drive
About this task
The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.
after working inside your computer.
before working inside your
assembly.
computer.
Desmontaje y reensamblaje 29