Model 1X Specifications - Heatworks 1X Manual Del Usuario

9 MODEL 1X SPECIFICATIONS
Description Electric tankless water heater that uses
direct energy transfer technology to
heat water. The MODEL 1X provides
reliable, controllable, and immediate hot
water in conjunction with your existing
water heater.
Domestic Hot Tank type hot water heater booster,
Water point-of-use and/or whole house
Application tankless water heating.
Power Maximum current draw is user
selectable in 5 amp increments from
15-48 amps. Maximum power output
can range from 1.65-12kW, dependent
on input voltage.
Input Voltage Single/split-phase operation, from
110-250 VAC (50/60 Hz), and 15 – 48
amps.
Temperature Microprocessor thermostatic
Control temperature control adjusts
temperature 60 times per second.
Water The water source must fall within 150 to
Conductivity 1500 μs of conductivity. The only way to
accurately check the conductivity of the
water is to use a conductivity meter. The
water company could have this
information.
www.myheatworks.com
Temperature
Temperature
Adjustment
Connections
Dimensions
Certification
Digital Display
Additional
CAUTION: Breaker must remain off until installation is complete.
50 °F to 120 °F (domestic hot water use)
Outlet 10 °C to 49 °C (domestic hot water use)
Setpoint
Range
Digital user interface, +/- 1 °F/°C
Setpoint adjustment
Water ¾ inch or 22 millimeter push-fit fittings
Operating Maximum 100 psi
Pressure
12.5" long by 6.5" in diameter
Weight 10.5 lbs., approximately 16 lbs. installed
Certified by a Nationally Recognized
Testing Laboratory (NRTL) for safety and
conformity. Visit our website for more
information regarding certification
standards and approvals.
Digital LCD and pushbutton user
interface to adjust temperature
setpoint. The digital display can be easily
switched from °F to °C.
Warranty 12 year warranty, with full unit
exchange.
No annual maintenance required.
Features Silent when operating.
13