Battery Installation; Connecting To Power - Roadstar HIF-1899TUMPK Manual De Instrucciones

42. SKIP/SEARCH FORWARD: press once to skip to next track, press & hold for
search forward.
43. STOP: in cd/usb mode, press to stop playback or cancel the stored program.
44. 10+ Track Button
45. 10- TRACK BUTTON
46. RANDOM BUTTON: in cd/usb mode, press to active random function.
47. DELETE BUTTON
48. PROGRAM: in CD/USB mode, press to active programming function.

BATTERY INSTALLATION

The infra-red transmitter requires 2 pcs CR-2025 size battery for operation.

CONNECTING TO POWER

Before switching on make sure that the voltage of your electricity supply is the same
as that indicated on the rating plate.
For your own safety read the following instructions carefully before attempting to con-
nect this unit to the mains.
Press the POWER button during 1 second to turn ON the unit. Press and hold the
POWER button during 3 seconds to turn OFF the unit. When no sound is produced,
the unit will switch OFF automatically after 15 minutes.
MAINS (AC) OPERATION
This unit is designed to operate on AC 240V 50Hz current only. Connecting it to other
power sources may damage the unit.
Caution: to prevent electric shock disconnect from the mains before removing
cover. No user serviceable parts inside. Refer servicing to qualified service personnel.
Remove the stereo carefully from the box, retaining the packaging for future use.
Connect the plug to a mains power inlet 110 - 240V AC ~ 50 Hz.
MW/FM TUNER
1. Switch ON the Power Switch (15). The red Power Indicator (17) will light up.
2. Select the desired frequency band with the Band Selector (14) for FM or (12) for
MW band.
3. Tune to the desired radio station by turning the Tuning control (21).
Antenna
For FM reception there is a built-in FM antenna wire (28) at the rear of the unit. Mo-

ve the wire around to obtain the best reception.
For MW reception the signals are picked up through a built-in ferrite antenna. Your

may have to orient the unit to obtain the best reception.
FM & FM-Stereo Reception
Stereo reception is possible when the tuned FM station is broadcasting in stereo.

When in FM Stereo mode and the station is broadscasting in Stereo, the STEREO

indicator (19) lights up.
English 2