Parts; Assembly - Truper CALA-A3 Instructivo

Speed
Control
Pendular Action
Control
Blade
Support
Protection
Cover
Blade Installation
• The opening of the blade support shall be free of sawdust.
• Loosen the installation screws with the Allen key.
• Insert the blade all the way into the blade support. The backside of the blade shall fit into the roller guide slot.
• Tighten firmly the installation screws. Vibration and blade use might get the screws run loose. Check the blade regularly; if
loose tighten the installation screws.
Blade
Support
6
ENGLISH
Continuous
Use Button
Switch
Roller Guide Cutting Angle
Adjusting Screws

Assembly

Roller
Guide Slot
Blade

Parts

Handle
Base
Plate
Installation
Screws
This jig saw uses T-shank
blade. To get better cutting
results make sure to use the
adequate blade for the
material and cut to be made.
Allen
Key
Power Cord
Protector
Power
Cord
Dust
collector
Parallel guide