Know Your Humidifier - Aircare EP9 Serie Guía De Uso Y Cuidado

Humidificador por evaporación
Ocultar thumbs Ver también para EP9 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INTRODUCTION
Your new humidifier adds invisible moisture to your home by moving dry inlet air
through a saturated wick. As air moves through the wick, the water evaporates into
the air, leaving behind any white dust, minerals, or dissolved and suspended solids in
the wick. Because the water is evaporated, there is just clean and invisible moist air.
As the evaporative wick traps accumulated minerals from the water, its ability to absorb
and evaporate water decreases. We recommend changing the wick at the beginning
of every season and after every 30 to 60 days of operation to maintain optimum
performance. In hard water areas, more frequent replacement may be necessary to
maintain your humidifier's efficiency.
Use only AIRCARE
parts, wicks and other products call 1-800-547-3888. The EP9 (CN) Series humidifier
use wick #1043(CN). Only the AIRCARE
humidifier. Use of other brands of wicks voids the certification of output

KNOW YOUR HUMIDIFIER

Description
Capacity of Unit
Sq. ft. coverage
Fan Speeds
Replacement Wick
Automatic Humidistat
Controls
ETL Listed
Volts
Hertz
Watts
®
or Essick Air
®
brand replacement wicks and additives. To order
Up to 2400 (tight
No. 1043(CN)
®
wick guarantees the certified output of your
EP9 Series
3.5 gallons
construction)
Variable (9)
Yes
Digital
Yes
120
60
70
3
.
HOW YOUR
HUMIDIFIER WORKS
Once the wick becomes
saturated, air is drawn in,
passes through the wick
and moisture is absorbed
into the air.
All evaporation occurs in
the humidifier so any
residue remains in the
wick. This natural
process of evaporation
creates no white dust like
some other humidifiers.
Dry air is drawn into the
humidifier though the back
and moisturized as it
passes through the
evaporative wick. It is then
fanned out into the room.
IMPORTANT:
Water damage may result
if condensation starts to
form on windows or walls.
Humidity SET point
should be lowered until
condensation no longer
forms. We recommend
room humidity levels do
not exceed 50%.
* Output based on 8' ceiling.
Coverage may vary due to
tight or average construction.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ep9 800Ep9 800cnEp9 500Ep9 500cn

Tabla de contenido