Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 22).
To store stations manually
1
While receiving the station you want to store, press and hold one of the number
buttons (1/
to 6/
USB/iPhone®/AUX
(iPhone source is not available when [USB MTP] is set to [ON] in the SYSTEM settings
(page 27).)
Playing back
Disconnect headphones from the device before connecting it to the unit.
USB devices (including Android™)/iPhone
1
Open the USB port cover.
2
Plug in the USB device/iPhone using an appropriate cable.
NOTE
To automatically switch to USB source when a USB device/iPhone is connected to the unit, set [USB
AUTO] to [ON] in the SYSTEM settings (page 27).
CAUTION
Use a USB cable (sold separately) to connect the USB device as any device connected directly to the
unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
AOA connections
A device running Android OS 4.1 or higher (before OS 8.0) installed and also supports
AOA (Android Open Accessory) 2.0 can be connected to the unit via AOA using the cable
supplied with the device. Most devices running Android OS 8.0 or later do not support
AOA 2.0.
NOTE
If you use an AOA connection, [APP CONTROL] needs to be set to [WIRED] (page 26) and [USB MTP]
needs to be set to [OFF] (page 27) in the SYSTEM settings.
) until it stops flashing.
- 8 -
Publicidad
Capítulos
