Storing Only The Desired Stations; Other Functions; Using The Rotary Commander - Sony CDX-R3000 Manual De Instrucciones

If FM stereo reception is poor
— Monaural Mode
During radio reception, press (SENS)
(BTM) repeatedly until "MONO"
indicator appears in the display.
"MONO" indicator is displayed.
The sound improves, but becomes monaural
("ST" disappears).
To return to normal radio reception mode, press
(SENS) (BTM) again ("MONO" indicator turns
off).
Storing only the desired
stations
You can manually preset the desired stations on
any chosen number button.
1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
band.
3
Press (SEEK) (+) or (SEEK) (–) to tune
in the station that you want to store.
4
Press the desired number button ((1)
to (6)) for 2 seconds until "MEM"
appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
12

Other Functions

You can also control the unit with a rotary
commander (optional).

Using the rotary commander

First, attach the appropriate label depending on
how you want to mount the rotary commander.
The rotary commander works by pressing
buttons and/or rotating controls.
S E L
M O D E
D S P L
By pressing buttons
(SEL)
(SOURCE)
Rotate the VOL control
to adjust the volume.
Press To
(SOURCE)
Change the source
(Radio/CD)/Power on
(MODE)
Change radio band
(ATT)
Attenuate the sound
(OFF)*
Stop playback or radio
reception/Power off
(SEL)
Adjust and select
(DSPL)
Change the display item
* If your car has no ACC (accessory) position on the
ignition key switch, after turning off the ignition, be
sure to press and hold (OFF) until the display
disappears.
D S P L
M O D E
S E L
(ATT)
(MODE)
(DSPL)
(OFF)