Attachements; Disposal Instructions - BE QUIET! Pure POWER L8 Serie Manual De Usuario

Ocultar thumbs Ver también para Pure POWER L8 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

B. C heck whether all connections are correctly connected and make any
adjustments required, such as incorrect polarity.
C. E xamine the connection of the on/off switch from the case to the motherboard.
Have the motherboard manual on hand if needed! Switch the power supply on by
turning the switch to position „I" and press the on/off switch on the case. If the
power supply still does not turn on, continue to the next item.
D. C heck your system for possible short circuits or faulty hardware, making sure
you switch off the computer and disconnect all devices not required for the
computer to start. Switch it on again. Repeat this process and switch on one
of the devices you have found likely to be faulty upon each restart. If the power
supply does not react due to a short circuit, wait at least 5 minutes after the
restart as the device is equipped with over power protection.
Important:
If the power supply does not work, check that you have read these instruction
thoroughly and have excluded the problems mentioned. If the problem persists,
contact our customer service department immediately.
All returns are examined by our RMA service. If a power supply is found to be
faultless, it shall be returned to the customer. A testing fee may be charged for the
expense incurred.
7.

ATTACHEmENTS

This tem is delivered with: Power cables, operating instructions, cable ties, and
screws to attach power supply.
8.

DISPOSAL INSTRUCTIONS

Used electronic equipment may no longer be disposed of in unsorted household
waste pursuant to European guidelines*. These must be disposed of separately.
Waste electronic and electric equipment must be transferred to a special collection
point (e.g. recycling centre). This is usually free.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido