STEERING WHEEL CONTROL SETTINGS
Select Radio
• To show which brand radio is "auto detected" to the interface, press the Autodetect button.
The radio detected will have a filled in circle. If the incorrect radio is shown, select Pioneer.
* Note: If the interface shows an Alpine radio, that means the interface doesn't detect a radio
connected it, i.e., an open connection. Verify that the 3.5mm jack is connected to the correct
steering wheel jack in the radio.
(CONT.)
Resetting the interface
1. With the vehicle running, press the Reset Vehicle Type button mentioned in
System Configuration.
2. Refer to Programming, step 3, from this point.
TROUBLESHOOTING
REV. 9/25/2019 INST108-FD6CH
15