Bosch PST Serie Manual Original página 11

OBJ_BUCH-1524-003.book Page 11 Friday, May 31, 2013 2:03 PM
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 63.
Noise and vibrational values (vector sum of three directions)
determined according to EN 60745.
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Mounting and Operation
Action
Inserting the Saw Blade
Removing the Saw Blade
Adapting the position of the guide
roller
Mounting the splinter guard
Mounting and use of "Cut Control" 5
Connecting the dust extraction
Adjusting the Cutting Angle
Switching on the sawdust blower
device
Switching On and Off
Guide the power tool toward the
workpiece only when switched on 10
Plunge Cutting
Lubrication when cutting metal
Selecting Accessories
Maintenance and Cleaning
 For safe and proper working, always keep the machine
and the ventilation slots as well as the tool holder
clean.
Clean the saw blade holder regularly. For this, remove the saw
blade from the machine and lightly tap out the machine on a
level surface.
Bosch Power Tools
Check the guide roller regularly. If worn, it must be replaced
through an authorised Bosch after-sales service agent.
Lubricate the guide roller occasionally with a drop of oil (see
figure 14, page 70).
After-sales Service and Application
Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Figure Page
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
1 64
E-Mail: boschservicecentre@bosch.com
2 64
Ireland
Origo Ltd.
3 64
Unit 23 Magna Drive
4 65
Magna Business Park
65
City West
6 66
Dublin 24
Tel. Service: (01) 4666700
7 66 – 67
Fax: (01) 4666888
8 67
Australia, New Zealand and Pacific Islands
9 68
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
68
Clayton South VIC 3169
11 69
Customer Contact Center
12 69
Inside Australia:
– 71 – 72
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
English | 11
1 609 92A 082 | (31.5.13)