Broan XB110H Guia De Instalacion página 10

Page 10
Retrofit Installation
11
Install Knockout Plate, Connect Wires and Reinstall Wiring Panel
• Use proper UL-approved connectors to secure wiring to the Knockout Plate provided in Parts Bag.
• Connect wires as shown in wiring diagram.
Attach cable clamp to Knockout
1
Plate. Knockout Plate mounts to
inside of Housing and may be
2
Screw from
Parts Bag
• See OPERATION section on page
12 for details.
• SENSOR/CONTROL switch allows
humidity control to be turned on for
automatic operation and off for fan
cleaning and maintenance purposes.
• Toggle mode can be used to manually
turn fan on.
• SENSOR/CONTROL switch may be
located where it is not easily accessed
for everyday usage; it may need to be
labeled and located where it can't be
turned on without being seen from
fan to comply with local and national
codes.
oriented as
desired.
Screw set
aside in
Step 6
Connect
3
wires
120 VAC
LINE IN
5
SENSOR/
CONTROL
BLK
WHT
GRD
RED
BLACK
BROWN
WHITE
SENSOR
CONTROL*
SWITCH BOX
* purchase separately
XB110H Installation Guide
4
14/2
BLK
WHT
GRD
ORANGE
GROUND
(green or bare)
KNOCKOUT
120 VAC
LINE IN
6
RED
FAN
BLK
ORG
SENSOR/
CONTROL
BRN
WHT
RECEPTACLES
PLATE