OPERATION
– Style soft-cascading waves and
curls
Preparation
Caution
The housing of the appliance be-
7
comes very hot near the heating
plates. Do not touch the housing
near the heating plates.
Place the appliance on a solid,
7
flat, heat resistant surface. Do not
place the appliance on any soft or
uneven surfaces such as carpets,
rugs or bedding and never cover
the appliance.
1 Release the plate lock
sary.
2 Plug the power cord
wall socket.
– The On/Off button lights up
3 Switch the appliance on by
pressing the On/Off button
for 2 seconds.
– The display
and the temperature 130 °C
flashes.
4 Press the »+«
tons to set the temperature.
_______________________
if neces-
D
into the
C
lights up in blue
B
or »–«
but-
F
G
Notes
Select the lowest temperature set-
7
ting the first time you use the ap-
pliance.
When the appliance has reached
7
the desired temperature, the tem-
perature indicator in the display
stops flashing, meaning that it
B
is ready to use.
Straightening hair
1
Comb or brush out a section of
your hair about 3 cm wide.
2 Place the section of hair between
the plates
line as you can, and then close
them.
Caution
Do not touch the plates as they are
7
very hot.
3 Guide the plates in a careful,
smooth movement away from the
E
head to the end of the section of
hair.
Notes
Repeat the procedure section by
7
section.
If you have thick hair, you might
7
have to repeat this procedure on
the same section several times.
as close to the hair
A
ENGLISH 2 3