Setup; Safety Notes - Kollmorgen VLM Serie Manual De Instrucciones

Setup

Setup
17
17.1

Safety notes

Only specialist personnel with extensive knowledge in the areas of electrical engineering /
drive technology are allowed to commission the drive unit of servo amplifier and motor.
Lethal voltage!
There is a danger of serious personal injury or death by electrical shock.
Built-in protection measures such as insulation or shielding may not be
l
removed.
Work on the electrical installation may only be performed by trained
l
and qualified personnel, in compliance with the regulations for safety
at work, and only with switched off mains supply, and secured against
restart.
High temperature!
Danger of light burns! The surface temperature of the motor can exceed
100°C in operation.
Check (measure) the temperature of the motor.
l
Wait until the motor has cooled down below 40°C before touching it.
l
Automatic restart!
The drive performing unplanned movements during commissioning
cannot be ruled out.
Make sure that, even if the drive starts to move unintentionally, no
l
danger can result for personnel or machinery.
The measures you must take in this regard for your task are based on
l
the risk assessment of the application.
English - 34
05/2016
DANGER
CAUTION
CAUTION
Kollmorgen
Servomotors VLM