Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS

CONTROL PANEL

1. Swing and wireless connect button:
• Press to start the auto swing feature. When auto
swing is activated, press again to stop the louver
at the desired angle.
• Press and hold for three seconds to start using
the wireless connect feature.
2. Fan and ionizer button:
• Press to select fan speed; normal or high. Light
will indicate current speed.
• Press and hold for three seconds to start the
ionizer.
3. Timer button: Press to start the automatic timer.
Light will indicate whether a timer is set.
4. Up and down buttons:
• Used to set the temperature and timer.
• Press and hold both up and down buttons for
three seconds to change the temperature display
from °C to °F.
1
2
3sec
3sec
3
5. LED display:
• Shows the set temperature in °C or °F.
• Shows the timer settings.
• While on dry mode, shows the relative humidity.
• When on fan mode, shows the room
temperature.
6. Sleep and fi lter button:
• Press to start the sleep feature.
• The fi lter light will illuminate after 250 hours of
use as a reminder to clean the fi lter; to reset the
fi lter after cleaning, press and hold the sleep
button for three seconds.
7. Mode button: Press to select the desired mode.
Modes will cycle in sequence with each press
of the button; auto, cool, dry, fan. Light will
indicate current mode.
8. Power button: Press to turn the appliance on or
off.
5
6
4
3sec
6
7
8

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Dpa140b8bdb-6

Tabla de contenido