Turn the control knob to the right and set the temperature wanted.
To turn the oven off, turn the knob to the left to position 0.
To turn the oven on, turn the selector knob (see figure) to the right or left into one of the
following positions
Caution: when the oven is on the door must be kept shut otherwise the knobs and protection
sheet could get hot and be damaged.
NB: Ovens are provided with an acoustic timing device, able to signal a maximum time of 120
minutes. Turn the knob to the right, positioning on the time desired, between and including 0 to
120 minutes (see figure); at the end of the set time, the alarm goes off.
Attention! During cleaning, do not wash the external parts of the appliance with direct
sprays of water or with high pressure.
After every use, clean the appliance thoroughly. Daily cleaning after switching off the appliance ensures the perfect
functioning and long life of the appliance.
Before starting to clean the appliance, disconnect the power supply. The parts in steel must be washed with hot water
and neutral detergent, then rinsed thoroughly in order to eliminate all traces of detergent; after which, dried with a dry
cloth. Do not use abrasive or corrosive detergents.
Important: As well as ordinary cleaning and maintenance, it is advisable to have the installation checked by an
installer at least once a year.
It is therefore suggested to draw up an after-sales assistance contract.
PREPARATION FOR A PROLONGED OUT OF USE
Thoroughly clean and dry the appliance as per instructions, switch off at the mains.
If a fault develops, turn off the appliance, switch off at the mains and call the technical assistance service.
GB
TURNING ON AND ADJUSTING THE STATIC OVEN
Top + bottom heating element
Bottom heating element
Top heating element
CLEANING AND MAINTENANCE
INSTRUCTIONS IN THE EVENT OF FAULTS
IE
MECHANICAL TIMER
16