Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Speed can be adjusted via dipswitches 7 and 8.
In order to select Static colors and flash, set dipswitch 9 and 10 to OFF. Set dipswitches 7 and 8 to OFF as
well.
Dipswitch 1 to 3 control the color settings.
Dipswitch 4 to 6 control the flash settings.
Sound Control
In order to select Sound controlled color change, set dipswitch 9 to ON and dipswitch 10 to OFF.
DMX-CONTROLLED OPERATION
You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
Addressing the Projector
Set the dipswitches 1 and 10 to ON. (This setting is also used to determine the Slave device).
Controlling:
After having addressed all LED Floodlights 252 RGB, you may now start operating these via your lighting
controller.
DMX-protocol
Channel 1
Red
0 - 255
0-100 %
Channel 2
Green
0 - 255
0-100 %
Channel 3
Blue
0 - 255
0-100 %
Channel 4
Dimmer
0 – 255
0-100 %
Channel 5
Flash
0 - 10
No function
11 - 255
0-100 % with increasing speed
Blackout
In order to select Blackout, set dipswitch 10 to ON and dipswitch 1 to 9 to OFF.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
19/37
51913860_V_1_0.DOC
Publicidad
Tabla de contenido
