Siemens CJT4B250 Instructivo De Instalación

s
Thermal Magnetic Trip Unit
D
isparador por sobreintensidad magnetotérmico
Déclencheur magnétothermique
Installation Instructions / Instructivo de Instalación
Hazardous Voltage Hazardous Voltage
Will cause death or serious injury Will cause death or serious injury
Turn off and lock out all power supplying this device before Turn off and lock out all power supplying this device before
working on this device. working on this device.
Replace all covers before power supplying this device is Replace all covers before power supplying this device is
turned on. turned on.
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
NOTE - These instructions do not purport to cover all details or variations in
equipment, or to provide for every possible contingency to be met in
connection with installation, operation or maintenance. Should further
information be desired or should particular problems arise, which are not
covered sufficiently for the purchaser's purposes, the matter should be
referred to the local Siemens sales office. The contents of this instruction
manual shall not become part of or modify any prior or existing agreement,
commitment or relationship. The sales contract contains the entire obligation
of Siemens. The warranty contained in the contract between the parties is the
sole warranty of Siemens. Any statements contained herein do not create new
warranties or modify the existing warranty.
Trademarks - Unless otherwise noted, all names identified by ® are registered
trademarks of Siemens AG or Siemens Industry, Inc. The remaining
trademarks in this publication may be trademarks whose use by third parties
for their own purposes could violate the rights of the owner.
400A
CJT2B250 3VL9425-7KN28
CJT2B300 3VL9430-7KN28
CJT2B350 3VL9431-7KN28
CJT2B400 3VL9435-7KN28
CLT2B400 3VL9494-7KN28
CLT2B500 3VL9450-7KN28
CLT2B600 3VL9460-7KN28
2 Pole / Polos
8 0 6 8 0 8 A 0 1
Item:
Tensión peligrosa. Tensión peligrosa.
Puede causar la muerte o lesiones graves. Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio. Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de Reemplace todas las barreras y cubiertas antes de
energizar el interruptor. energizar el interruptor.
Ø .078 - .098 X 4.0
[ Ø 2 - 2.5 mm X 100 mm ]
400A
CJT3B250 3VL9425-7KN38
CJT3B300 3VL9430-7KN38
CJT3B315 3VL9431-7KN38
CJT3B400 3VL9440-7KN38
CLT3B400 3VL9494-7KN38
CLT3B500 3VL9450-7KN38
CLT3B600 3VL9460-7KN38
3 Pole / Polos
1 / 5
U.S. Cat. No. Euro Order No.
CJT_ B _ _ _ 3VL94 _ _ - 7 _ _ _ 8
CLT_ B _ _ _ 3VL95 _ _ - 7 _ _ _ 8
For Use With Frame JG, LG
Para Usar Con Caja Base JG, LG
Tension dangereuse. Tension dangereuse.
Danger de mort ou risque de blessures graves. Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de Couper l'alimentation de l'appareil et barrer avant de
travailler. travailler.
Remplacez touts les couverts avant que Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté. l'approvisionnement de pouvoir soit alimenté.
7/16"
Cal ISO 6789
400A
CJT4B250 3VL9425-7LQ48
CJT4B300 3VL9430-7LQ48
CJT4B350 3VL9431-7LQ48
CJT4B400 3VL9435-7LQ48
4 Pole / Polos
I.L. No. 806808A01
6 mm