Prepare Window For Installation - Haier HWR05XCJ Manual De Uso Y Cuidado

NOTE: Your model may differ from the one shown.
Install Side Curtains
NOTE: Attach curtains to the air conditioner before placing the air
conditioner in window.
1. Place the tabbed side of the side curtain in the track on the
right-hand side of the air conditioner cabinet.
A. Tabbed side of side curtain
B. Lock edge side of side curtain
2. Slide the side curtain down the track until the curtain is
aligned with the top and bottom of the air conditioner
cabinet.
3. Slide the side curtain frame into the top channel on the top
of the air conditioner and the track on the bottom of the air
conditioner.
6
A
B
4. Slide the side curtain frame as close to the air conditioner
as necessary to lock the side curtain to the frame.
5. Repeat above steps for the left-hand side curtain and
frame.

Prepare Window for Installation

1. Measure the width of the window opening.
2. Mark the center line on the inside windowsill.
A
B
A. Width of window opening
B. Center line
3. Install the Window lock bracket behind the inner windowsill,
with the short side of Window lock bracket as shown.Use the 2
wood screws 31/32" provided.
The Window lock bracket helps to hold unit securely in place.Be
sure to place Window lock bracket edge flush against back of inner
sill.
C
D
E
F
A. Center line
B. ⁄ " screws
C. Inner sill
B
A
D. Outer sill
E. Short side
F. Window lock bracket