Charging The Battery - Briggs & Stratton Brute 7800886 Manual Del Usuario

Ocultar thumbs Ver también para Brute 7800886:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation
B
A
Figure 13: Installing the grass bag
WARNING
!
Grass Catcher bags are made of woven fabric, and are
subject to deterioration and wear during normal usage.
Check condition of bag before each use. Immediately
replace worn or damaged catcher bags with only bags
recommended by the manufacturer. The grass catcher is
optional equipment on some models.
16

Charging the Battery

(7800887)
The battery in this mower is sealed and maintenance
free, and requires no service other than charging. If the
battery will not accept a charge, bring the mower to an
authorized service center for service.
1. Connect the battery charger to the battery con-
C
nector (A, Figure 14), and plug the charger into a
120-volt outlet for 12-24 hours. (Longer periods will
not damage the battery.)
2. Remove the charger from the battery connector,
and connect the battery connector to the engine
harness connector (B).
Important: Use only the charger supplied with the
mower to charge the battery. Using a different charger
may damage the battery and/or mower.
!
Figure 14: Charging the battery
!
Keep all sparks, flame and fire away from area when
charging the battery. Never use "BOOST" chargers on
the battery.
A
B
WARNING
www.brutepower.com
!

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Brute 7800887Btxpv22725Btxpv22725e

Tabla de contenido