Safety Signs; Product Identification Label - Stiga BL 900 Li 48 Manual De Instrucciones

Soplador portátil de jardín a batería
Ocultar thumbs Ver también para BL 900 Li 48:
Tabla de contenido

Publicidad

NOTE
Improper use of the machine will void the
warranty and relieves the Manufacturer of any
liability, placing all responsibility for damage or
injury, to him/herself or third parties, on the user.
3.1.4 Type of users
This machine is intended for use by
consumers, i.e. non-professional operators.
It is intended for "hobby-related activities".

3.2 SAFETY SIGNS

The machine has various symbols on
it (fig. 2). Their function is to remind
the operator of the correct conduct for
use, with due care and caution.
Meanings of the symbols:
ATTENTION - DANGER
The failure to use this machine
correctly can be hazardous
for oneself and others.
ATTENTION
Read the owner's manual
before using the machine.
Use safety goggles.
Use hearing protections.
Do not leave the machine in the
rain (or in damp conditions).
PROJECTION HAZARD
Pay attention to possible flying
debris projected by the air flow,
which may cause serious injuries
to persons or damage to objects.
PROJECTION HAZARD
People or pets must be kept at least
15m away when using the machine.
MUTILATION HAZARD
Always keep the hands away from
the air intake grille. The rotor in
motion can cause serious injuries.
SERIOUS INJURY HAZARD
Keep loose clothing away from
the air intake grille, since it could
become trapped in the rotor
and cause serious injuries.
SERIOUS INJURY HAZARD
Keep hair away from the air
intake grille, since it could
become trapped in the rotor
and cause serious injuries. Tie
your hair back if it is long.
ATTENTION
Any damaged or illegible decals must
be replaced. Order replacement decals
from an Authorised Service Centre.

3.3 PRODUCT IDENTIFICATION LABEL

The product identification label
provides the following data (fig. 1 ):
1. Name and address of Manufacturer
2. Type of machine
3. Sound power level
4. Conformity marking
5. Year of manufacture
6. Serial number
7. Article code
8. Class II; Dual insulation
Write the identification data of the
machine in the specific space on the
label on the back of the cover page.
EN - 8

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sab 900 ae

Tabla de contenido