Briggs & Stratton Elite Serie Instrucciones De Uso página 13

3. Select desired ProjectPro™ nozzle:
• For delicate rinse (lower pressure and higher
flow), for gentle cleaning of cars/trucks, boats, RV's,
patio furniture, lawn equipment, etc., select yellow
Delicate ProjectPro™ nozzle (Figure 14).
Figure 14 — Delicate Nozzle
• For general rinsing (medium pressure and medium
flow), ideal for most all purpose cleaning such as
home siding, brick patios, wood decks, driveways
and sidewalks, garage floors, etc., select orange
General ProjectPro™ nozzle (Figure 15).
Figure 15 — General Nozzle
• For maximum rinsing (higher pressure and lower
flow), for stubborn or hard to reach surface such
as second story surfaces, paint removal, oil stains,
rust removal or other stubborn substances (tar,
gum, grease, wax, etc.), select red Max
ProjectPro™ nozzle (Figure 16).
2550 PSI Pressure Washer
Figure 16 — Max Nozzle
• To apply detergent, applies project specific cleaners
to help break down stubborn dirt and grime on a
variety of surfaces, select black ProjectPro™
cleaning detergent nozzle (Figure 17).
Figure 17 — Cleaning Detergent Nozzle
4. Pull back on collar, insert new ProjectPro™ nozzle and
release collar.Tug on ProjectPro™ nozzle to make sure
it is securely in place.
5. For most effective cleaning, keep ProjectPro™ nozzle
from 8 to 24 inches away from cleaning surface. If you
get ProjectPro™ nozzle too close, you may damage
cleaning surface.
6. DO NOT get closer than 6 inches when cleaning tires.
Cleaning and Applying Detergent
IMPORTANT: Use detergents designed specifically
for pressure washers. Household detergents could
damage the pump.
13