Installation; Unpack The Machine; Install The Middle Handle; Install The Upper Handle - GreenWorks Pro 2602502 Manual Del Operador

Ocultar thumbs Ver también para 2602502:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SYM-
SIGNAL
BOL
CAUTION
CAUTION
6

INSTALLATION

WARNING
Do not change or make accessories that are not
recommended by the manufacturer.
WARNING
Do not connect to power supply until you assemble all
the parts.
6.1

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine
before use.
WARNING
If the parts are damaged, do not use the machine.
If you do not have all the parts, do not operate the
machine.
If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
English
MEANING
Indicates a potentially haz-
ardous situation, which, if
not avoided, may result in
minor or moderate injury.
(Without Safety Alert Sym-
bol) Indicates a situation
that may result in property
damage.
6.2

INSTALL THE MIDDLE HANDLE

13
1. Align the holes in the middle handle (15) and the
lower handle (13).
2. Put the bolts (17) through the middle handle (15)
and the lower handle (13).
3. Tighten the handle knob (16) onto the bolt (17).
4. Repeat for left/right side.
6.3

INSTALL THE UPPER HANDLE

17
1. Align the holes in the middle handle (15) and the
upper handle (14).
2. Put the bolts(17) through the holes.
3. Tighten the handle knobs(16) onto the bolts(17).
4. Do the same operation on the other side.
7
17
16
15
14
16
15
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Snb403

Tabla de contenido