Features; Using Cord Hook; Tool Storage - Panasonic Quickdraw MC-V5209 Instrucciones De Operación

Cord Hook
Crochet de rangement
du cordon
Sujetador del cordón
Wands (2)
Tubes (2)
Tubos (2)
Crevice Tool
Suceur plat
Herramienta para hendiduras
Dusting Brush
Brosse à épousseter
Cepillo para sacudir
Raised Tab
Wand
Saillie
Tube
Lengüeta saliente
Tubo
"J" Slot
Ranura en "J"
Fente "J"
FEATURE

Using Cord Hook

1)
2)

Tool Storage

Hose
Manguera
Tuyau
- 14 -
Detach plug head from power cord.
Rotate cord hook down to release
cord.
Return the cord hook to the upright
position before attempting to rewind
the cord.
Some tools may already be stored on
vacuum cleaner.
Place hose in front of handle on hose
holder.
Attach wand to hose by aligning the two
(2) raised tabs on wand with "J" slots in
hose, guide tabs along grooves, twist to
lock in place.
Place wand in center slot of tool holder,
twisting and pushing down over short
hose to assure a good connection.
Store other wand in front slot of tool
holder with dusting brush in top of wand.
Place crevice tool into rectangular rear
slot of tool holder.
Refer to PARTS IDENTIFICATION section
for tool location.