Routine Care Of Cleaner; Replacing Secondary Hepa Filter; Changing Dust Bag - Panasonic Quickdraw MC-V5209 Instrucciones De Operación

Performing the following tasks will keep your new Panasonic vacuum cleaner operating at
peak performance levels and will ensure these high levels for years to come. Check the
BEFORE REQUESTING SERVICE section in this manual for recommendations on performing
some of these tasks to help solve various problems that may occur.
Secondary HEPA Filter
(White Side Up)
Filtre secondaire de type HEPA
(Côté blanc sur le dessus)
Filtro de HEPA Secundario
(Blanco hacia arriba)
Always operate vacuum with genuine Panasonic Type U3 Standard or U6 Electrostatic dust
bags installed. Panasonic dust bags may be purchased through any authorized Panasonic
dealer or ordered from service company.

ROUTINE CARE OF CLEANER

Replacing Secondary HEPA Filter

Rib Projections
Lengüetas
Rainures

Changing Dust Bag

Secondary HEPA filter protects the
motor.
Check filter when installing a new
dust bag.
If dirty, pull filter from bottom of dust
compartment and replace.
Place new filter, white side up, in dust
compartment, DO NOT CLEAN WITH
WATER*.
Ensure filter is fully inserted under
plastic rib projections.
*Filter cannot be cleaned and should be
replaced at least once each year.
1)
Pull outward on dust cover grip to
remove the dust cover.
2)
Remove dust bag by grasping
cardboard portion and pulling out.
- 24 -