Thermador PRD30 Manual De Uso Y Cuidado página 13

®
THERMADOR Full Access
all models. Each gliding oven rack can be pulled out and
pushed back into the oven with minimal effort — even while
supporting a large turkey or roast.
Always remove
before Self Clean
IMPORTANT:
Always remove the Full Access oven racks before self-
cleaning the oven. If the gliding racks remain in the oven
during Self-Clean, lubricants in the glide mechanisms of
each rack will be lost and the finish will discolor.
WARNING:
To help prevent burns, NEVER remove or reposition the
oven racks while the oven is ON or while the oven is
cooling.
WARNING:
Aluminum foil should never be used to cover the oven
racks or to line the oven. It can damage the oven and
cause a fire hazard if heat is trapped under it.
English 8
®
oven racks are standard on
Figure 2: Full Access Oven Rack
Placing Racks in the Oven:
IMPORTANT
:
When placing the gliding rack in the oven, make sure the
front supports on the rack guides rest in the large slots at
the front corners of the rack. This is necessary to keep the
rack in the correct position while fully inserted into the
oven.
1. Hold the rack on a
slight angle. Place the
safety hooks under the
front of the rack guides.
2. Push the rack into the
oven, lifting the rack
stops over the front of
the rack guides.
3. Hold the rack straight.
4. Push the rack in until it
is even with the front
hooks.
5. Lift the rack up.
6. Push the rack in
completely.
7. Engage the rack's front
hooks on the rack
guides.
Figure 3: Inserting the Oven Rack