Sangean ProTravel PT 80 Instrucciones De Manejo página 17

02 Yacht Boy 80, GB
16
19.08.2003 14:52 Uhr
OPERATION
_______________________________________________
Setting various function modes
MODE
Using the » « button and a two-digit code, which you enter using the
0 ... 9
numerical keys »
Code Function
MODE 10 FM frequency change
in 100 kHz steps
MODE 20 MW frequency change
in 9 kHz steps
MODE 30 Time display in 12
hour format
MODE 40 Signal tone off
MODE 50 Arrange stations in
sequence from low to
high frequency range
This is how to change the various function modes:
1 MODE
Press » «.
– Display: » « flashes.
( )
2
Enter the code, for example »
– Display: » « flashes.
( 40 )
3 FREQ./CLOCK
Press »
– Display: briefly »
– The signal tone is deactivated.
Switching on the back lighting for the display
1 LIGHT
Press » « to switch on the display lighting for 7 seconds.
2 LIGHT
Press » « to switch off the display lighting.
Disabling and enabling the buttons
1
To disable the buttons, move »
– Display: » «.
2
To enable the buttons, move »
– Display: » « disappears from the display.
Seite 36
«, you can change various functions:
Code
11
21
31
41
51
0 ... 9
«, using »
40
« to confirm.
«, then the time or frequency.
OFF
•
LOCK
« to the »
LOCK
« to the opposite position.
Function
FM frequency change
in 200 kHz steps
MW frequency chan-
ge in 10 kHz steps
Time display in 24
hour format
Signal tone on
Arrange stations in
sequence from low to
high frequency range
«.
« position.