Seiko V176 Manual Del Usuario página 7

• If the STOPWATCH hands do not return to the "0" position when the stopwatch is reset to
"0," follow the procedure in "SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND
POSITION".
• While the second hand is moving at 2-second intervals, the stopwatch cannot be activated. This is
not a malfunction. See "ENERGY DEPLETION FOREWARNING FUNCTION" and "HOW TO CHARGE
AND START THE WATCH".
<How to reset the stopwatch>
WHILE THE STOPWATCH HANDS ARE MOvING
1. Press Button A to stop the stopwatch.
2. Press Button B to reset the stopwatch.
WHILE THE STOPWATCH HANDS ARE STOPPED
One of the following stopwatch operations has been made. Reset the stopwatch accordingly.
[When the stopwatch is stopped]
1. Press Button B to reset the stopwatch.
[When the split time measurement is displayed while the stopwatch is measuring]
1. Press Button B to release the split time display. The stopwatch hands
move quickly, and then indicate the measurement in progress.
2. Press Button A to stop the stopwatch.
3. Press Button B to reset the stopwatch.
[When the split time measurement is displayed and the stopwatch is stopped]
1. Press Button B to release the split time display. The stopwatch hands move
quickly, and then stop.
12
2. Press Button B to reset the stopwatch.
Standard measurement
A A B
START STOP RESET
Accumulated elapsed time measurement
A A A
START STOP RESTART
Restart and stop of the stopwatch can be repeated by pressing Button A.
Split time measurement
A B B
START SPLIT SPLIT
RELEASE
Measurement and release of split time can be repeated by pressing Button B.
Measurement of two competitors
A B
START FINISH TIME
OF COMPETITOR
1ST COMPETITOR FINISHES
A B
STOP RESET
A B
STOP RESET
A B B
2ND FINISH TIME RESET
OF
2ND COMPETITOR
13