Olimpia splendid PELER 4D Instrucciones Para La Instalación, Uso Y Mantenimiento página 51

3.4.c - Oscillation key (A1)
When the appliance is on, press this button to start or stop the air orientation
function through the vertical flaps (11) (right and left).
Press it once to start the function; the oscillation LED switches on.
Press it a second time to stop the function.
3.4.d - Mode key (A3)
When the appliance is switched on, "normal" mode is set by default.
Press this key and the mode changes according to this sequence:
Normal ---> Natural ---> Sleep ---> Normal ---> Natural ---> ...
The mode LED changes accordingly (the "natural" (B3a) and "sleep" (B3b) modes
are not available at "silent" speed (B3c)).
The various modes work as follows:
1 - Normal (B3a): the appliance works constantly at the set speed.
2 - Natural (B3b): the appliance works changing air speed continu-
3 - Sleep (B3c):
3.4.e - Timer key (A6)
When the appliance is on, by pressing this key on the display, the timer changes
according to this sequence:
00h (off) ---> 01h ---> 02h ---> 03h ---> .. 08h ---> 00h (off) ---> ..
Once the timer has been set, after a few seconds the display goes back to showing
the room temperature detected.
3.4.f - Cooling/humidifier key (A2)
When the appliance is running, press this key to start or stop the cooling/humid-
ifier function.
Press it once to start the function; the pump (4) and the cooling/humidifier LED
(B4) switch on.
Press it a second time to stop the function.
ously.
the appliance works changing air speed continu-
ously, reducing it down to the minimum value.
EN - 18
PELER 4D