Dri-Eaz 1200 115V Manual Para El Usuario

Model 1200 115V Portable Dehumidifier (F203-A)
®
The DrizAir 1200 dehumidifier reduces humidity in enclosed structural environments by
removing water vapor from the air. The 1200 is engineered to be rugged, durable and highly
portable, making them ideally suited for water damage restoration, structural drying,
construction, and other applications requiring temporary, high-performance
dehumidification.
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
SAFETY INSTRUCTIONS
WARNING
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing. Unit must be grounded.
• Inspect the power cord before use. If cord is
damaged, do not use. Always grasp the plug (not
the cord) to unplug.
• Insert three-prong plug on power cord into a
matching electrically grounded outlet. Do not use
adapter. Never cut off third prong. Do not use an
extension cord.
• The unit must be operated on a 115V/60 Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
• Keep motor and wiring dry.
• Do not attempt to repair the unit. Contact your local
authorized distributor for service.
BEFORE YOU BEGIN
Unpacking your unit
Retain all packing material and boxes for possible
equipment returns.
Install the handle
The 1200 is shipped without the handle attached. Install
the handle using the four ¼-20 hex washer-head bolts
supplied and a ⅜ in driver or wrench. Make sure the
07-01705B 2014-04 Warranty 07-00420
Owner's Manual
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950 www.dri-eaz.com
bolts are firmly secured before using the unit. Do not
overtighten.
Warranty registration
Visit warranty.drieaz.com to register your purchase.
Registration allows us to better assist you with using,
maintaining or servicing your equipment, as well as to
contact you in case we have important safety information
concerning your Dri-Eaz product. If you determine
service is required, have your equipment model, serial
number and original proof of purchase available and call
your distributor for assistance with obtaining a return
material authorization (RMA).
INTRODUCTION
Dehumidifiers reduce humidity in enclosed structural
environments by removing water vapor from the air. With
proper use, the 1200 can help dry carpet, carpet pad,
floors, walls, building contents and more. Using
dehumidifiers can also help prevent secondary damage
caused by high humidity. For best results, use the 1200
with Dri-Eaz TurboDryer
perimeter of the room to distribute heat energy and
release moisture from wet surfaces into the air.
How the 1200 dehumidifier works
Dri-Eaz refrigerant dehumidifiers operate by pulling
moist air in across a very cold evaporator core. The
moisture in the air condenses on the coil. In certain
conditions, the machine operates in defrost mode,
warming any frost accumulated on the evaporator coil
back into water. The water collects in a tray and is
pumped out through a hose.
IMPORTANT: Before moving the unit, make sure there's
no water in the pump. See how to use the PURGE
function under "How to use the control pad" on page 2.
1
®
airmovers placed around the
Dri-Eaz Products, Inc.