EAZ
Featuring integrated sensors and remote monitoring capability
The Dri-Eaz® LGR i-Series dehum idifiers r educe humidity in enclose d st ructural
environments by removing water vapor from the air. The i-Series is engineered to be rugged,
durable an d highl y p ortable, making them ideally su ited f or w ater dam age r estoration,
structural dr ying, construction, and ot her applicat ions r equiring temporary, high-
performance dehumidification.
READ AND SAVE THESE INSTRUCTIONS
SAFETY INSTRUCTIONS
AWARN1NG_1
WARNING! Electric shock
surface hazards. Unplug unit before opening cover
for cleaning or servicing. Unit must be grounded.
• Inspect the power cord before use If cord is
damaged, do not use. Always grasp the plug (not
the cord) to unplug.
• Insert three-prong plug on power cord into a
matching electrically grounded outlet. Do not use
adapter. Never cut off third prong. Do not use an
extension cord.
• The unit must be operated on a 115V/60 Hz circuit
protected by a Ground Fault Circuit Interrupter
( GFCI) device.
• Keep motor and wiring dry.
• Do not attempt to repair the unit. For Authorized
Service Centers. call Dri-Eaz at 800-932-3030.
BEFORE YOU BEGIN
Unpacking your unit
Retain all packing material and boxes for possible
equipment returns. Find and retain the AA batteries.
which must be installed before using the unit
141 Kincierkamack Rd. Park Ridge, NJ 07656 Tel 201-782-1782 Fax. 201-782-1783 Web www amgair corn Email: info@amgair pont
Owner's Manual
LGR 2800i Portable Dehumidifier (F410)
LGR 3500i Portable Dehumidifier (F411)
Air Marketing Group LLC.
141 Kinderkarnack Rd. Park Ridge NJ 07656
Phone 201-782-1782 Fax 201-782-1783
Patent Pending: 12,272.455
hazard, rotating fan, hot
www amgair corn
Installing the
Two AA batteries are shipped with the 2800i and 3500i
to provide power to the
transmitter when the unit is not connected to AC power.
The battery compartment is located directly under the
power cord socket on the back of the unit (see Figure C).
Use a flat-blade screwdriver to turn the battery
compartment cover 90' counter-clockwise and remove
the cover. Insert the batteries with the negative terminal
in first. After inserting the batteries, secure the cover by
pressing it in with the screwdriver and turning it 90'
clockwise.
Warranty registration
warrantycirieaz.com
Visit
Registration allows us to better assist you with using,
maintaining or servicing your equipment, as well as to
contact you in case we have important safety information
concerning your Dri-Eaz product. If you determine
service is required, have your equipment model, serial
number and original proof of purchase available and call
your distributor for assistance with obtaining a return
material authorization (RMA).
CONTENTS GUIDE
Maintenance ............................................
Cleaning ......................................................
Air Marketing Group
sensor batteries
HygroTraC® wireless
to register your purchase.
2
3
3
5
6
7
8
8