STERWINS 40 VLM2 - 36P.1 Instrucciones De Montaje página 330

FR
Problems
ES
The mower is
diffi cult to push
PT
The grass
IT
cuttings are
not collected
EL
properly in the
grass box
PL
The mower
vibrates at high
RU
speed
KZ
The motor stops
while mowing
UA
Mower suddenly
stopped while
RO
cutting grass.
Product does
BR
not reach full
power
EN
Vibration
or noise is
excessive
Product
suddenly stops
9. END OF LIFE
Electrical products should not be discarded with household products. Used electrical products
must be collected separately and disposed of at collection points provided for this purpose.
Talk with your local authorities or dealer for advice on recycling.
10. WARRANTY
10.1 OUR WARRANTY
STERWINS products are designed according to the highest quality standards for products intended for
the consumer market. This sale warranty covers a period of 3 years as of the date of purchase of the
product. This warranty covers all defects in materials and workmanship: missing parts and elements,
Probable causes
The grass is long, the rear
panel of the mower and the
blade are dragging in very
dense grass, or the cutting
height is set too low
The cutting height is too
low
The blade is out of balance
or worn
The motor shaft is twisted
The cutting height is too
low
The battery is discharged
Mower maybe occur
overload
Battery pack capacity too
low
Air vents are blocked
Bolts/nuts are loose
Battery pack discharged
Battery too hot
Solutions
Raise the cutting height
Raise the cutting height
Change the blade
Turn off the motor and inspect
the mower. Get the mower
repaired.
Raise the cutting height
Recharge the battery
Stop the mower and wait for 3
minutes to restart.
Charge battery pack
Clean the air vents
Tighten bolts/nuts
Remove and charge battery
pack
Remove battery pack and let it
cool down
332
Qualifi cation
required
-
-
-
Approved repair
centre
-
-
-
-