Ryobi RLT30CDNB Manual De Utilización página 5

Recortadora de hilo
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SPECIFIC SaFETY RUlES FOR TRIMMER USE
Make sure all guards, straps, deflectors and handles
n
are properly and securely attached.
Use only the manufacturer's replacement line in the
n
cutting head. Do not use any other cutting attachment.
Weight
- Without fuel and trimming head
- Without fuel with trimming head
Fuel tank volume
Cutting swath
Engine displacement
Line diameter (Reel Easy
Line diameter (Pro Cut II
Maximum engine performance
(in accordance with ISO 889)
Maximum rotational frequency
of the the spindle
Engine speed (rotational frequency)
at recommended max. spindle
rotational frequency
Engine speed (rotational frequency)
at idle
Fuel consumption (in accordance
with ISO 889) at max. engine performance [kg/h or (L/h)]
Specific fuel consumption
(in accordance with ISO 889)
at max. engine performance
DESCRIPTIOn
1.
Primer Bulb
2.
Choke Lever
.
Fuel Cap
.
Starter Grip
5.
Throttle Lock
6.
On / Off Switch
7.
Throttle Trigger
8.
Rear Handle
9.
Front Handle
10. Shaft
11. Grass Deflector
12. Pro Cut II
TM
1. Cutting Line
1. Idle Speed Screw
15. Reel Easy
TM
(RLT0CESNB)
16. Knob (RLT0CESNB)
17. Hanger Cap (RLT0CESNB)
[cm
TM
)
)
TM
[g/kW.h or (L/kW.h)]
GB
E
English
E
GB
Never operate unit without the safety guard in place
n
and in good condition.
Maintain a firm grip on both handles while trimming.
n
Keep bump head below waist level. Never cut with
the bump head located over 76 cm or more above the
ground.
SPECIFICaTIOn
RLT0CDNB
(kg)
or (L)]
15 or (0.15)

(mm)
(cm
/ cc)

(mm)
(mm)
(kW)
- 1
(min
)
- 1
(min
)
- 1
(min
)
2,800-,800
0.8 or (0.66)
60 or (0.87)
aSSEMBlY
Please refer to Fig. 2.
WaRnInG
If any parts are damaged or missing, do not
operate this tool until the parts are replaced.
Failure to heed this warning could result in
serious personal injury.
WaRnInG
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WaRnInG
To prevent accidental starting that could cause
serious personal injury, always disconnect the
5
.66
.80
2
0
2.
2.7
0.75
12,000
12,000
RLT0CESNB
5.25
5.2
15 or (0.15)
2
0
2.
2.7
0.75
12,000
12,000
2,800-,800
0.8 or (0.66)
60 or (0.87)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rlt30cesnb

Tabla de contenido