Storing The Product - Ryobi RLT30CDNB Manual De Utilización

SPaRK PlUG REPlaCEMEnT (Fig. 10)
This engine uses a Champion RCJ-6Y or NGK BPMR7A
spark plug with .05 in. electrode gap. Use an exact
replacement and replace annually.
IDlE SPEED aDJUSTMEnT (Fig. 11)
If the cutting attachment turns at idle, the idle speed
screw needs adjusting on the engine. Turn the idle speed
screw counterclockwise to reduce the idle RPM and
stop the cutting attachment movement. If the cutting
attachment still moves at idle speed, contact a service
dealer for adjustment and discontinue use until the repair
is made.
STORInG THE PRODUCT
Clean all foreign material from the product. Store idle
n
unit indoors in a dry, well-ventilated area that is in-
accessible to children. Keep away from corrosive agents
such as garden chemicals.
Abide by all ISO and local regulations for the safe
n
storage and handling of petrol.
When storing 1 month or longer:
Drain all fuel from tank into a container approved for
n
petrol. Run engine until it stops.
GB
E
English
E
GB
8